Air conditioning installation can be simple, an easy do it yourself project if you are installing a window AC. However for more complex central air conditioning installation you will require specialized help and service technicians to do the job. Here are some simple tips that will guide you in your endeavor of successfully installing an air conditioning unit. Before the actual purchase and installation of the air conditioner, the first thing that you need to consider is the size of the room. This helps you in determining the capacity of the AC accordingly. Click over here now Absolute Air, LLC Measure the size of the window where you are going to install the AC and then check for adequate electrical service. Ensure that the window frame and the sill are in a good condition and are strong enough to support the weight of the unit. In certain cases you might be required to obtain an authorization for installing the AC. Apart from the air conditioner, the things that you need for the air conditioning installation includes a measuring tape, metal brackets and other support frames, caulking gun and waterproof caulk, screwdrivers and foam insulation strips. For installing the air conditioner, you need to first set up the mounting hardware which includes sill mounted supports. Open the window and follow the step-by-step instructions provided by the manufacturer to install the unit. While screwing on the bracket to the sill make sure that you place it at a tilt to ensure proper condensation. For metal brackets, sheet metal screws are used. Now lift the air conditioner and set it on the bracket. The modern air conditioners are equipped with pockets under the unit to enable easy sliding into the window opening. Slide the window on top of the unit to set it into place. Open the extensions on each side of the air conditioner making sure that the units between the window and unit are securely closed. Using angle brackets fasten these extensions onto the window sash. Secure the window sashes and finish off the installation by sealing the gaps with foam strips to ensure adequate insulation. Based on the manufacturer's instructions caulk the unit outside and plug on the AC to use it.
Air Conditioning Installation Tips